MG Energy Systems HE Series - Next Generation LiIon Battery Solutions

25.2V 300Ah 7560Wh LiIon Battery Module
Superior energy density
Low voltage solutions: 24V up to 96V
High voltage solutions: Up to 470V
Redundant option
Plug and Play installation: Automatic configuration
NMEA2000 compatible
Specifications:
Cycle life: 3000 cycles (75% DoD) - Default mode
Maximum discharge current: 450A*
End of discharge voltage: 21.0V
Charge voltage: 29.4V
Maximum charge current: 300A*
Operating Discharge temperature: -20°C to + 55ºC
Operating Charge temperature: 0°C to + 45ºC
Storage temperature: -20°C to + 45ºC
Humidity (non-condensing): ≤ 95%
Protection class: IP40
Cooling: Convection (No Internal Fans)
BMS passive balancing with integrated slave BMS
Unlimited Parallel Connections Allowed
Up to 5 Modules in Series Allowed
Important Information:
This MG Energy 25.2V Lilon Battery can be connected in Unlimited Parallel configurations.
Up to Five (5) Batteries in series connection are allowed for this model.
External BMS:
These batteries require the use of a MG Master LV Battery Management Controller.
Battery Management Controllers are available to suit this module in the following configurations:
1-2 in Series.
3-4 in Series.
5 in series.
Fuses:
300A fuse inside battery. Fuses can be replaced with dummy fuses for high power applications. The battery will require external fuses in these cases.
*See Product Manual or Datasheet for more information and full specifications.
Product Supplied With:
RJ45 CANBus comms connection.
 
Product Details
Selling Unit
EACH
Model No
MGHE240300-RJ45
Inventory Code
19001-029
Brand
MG Energy
Description
25.2V 300Ah 7560Wh HE Series LiIon NMC Battery + RJ45 Connector - Metal Enclosure - Series Up to Five (5) Modules
Application
Automotive/Marine/RV Auxilliary Battery Banks, Off-Grid & Self Consumption Solar, UPS, Peak Shaving
Chemistry
Lithium Ion
Voltage
25.2V
Watt Hour
7560.0Wh
Nominal Capacity
300Ah
Maximum Continuous Discharge Current
450A
Termination
M8 Stud (Max. 15Nm)
Size
7S96P
Width
193mm
Height
497mm
Length / Breadth / Depth
366mm
Weight
41500g
 
High Voltage Systems:
The HE batteries are available in a high voltage version (HV). This makes it possible to connect these batteries in series up to 16 modules (465VDC). This configuration can be used in UPS systems, propulsion applications and solar energy storage.
 
M12 and RJ45:
The communication connections between the batteries and Master unit can be established with either economical RJ45 cables or more robust M12 cables. Up to 96V both options are available. In the range higher than 96V only the M12 option is available.
 
Safety:
Each battery module comes with an integrated battery management system (BMS). This is an intelligent electronic module (slave BMS), that measures all cell voltages and temperatures to control balancing on both battery cell and module level. The battery modules communicate by a galvanic isolated CAN-Bus with the MG Master LV or HV (master BMS), which collects and monitors the status of all battery modules. If the measured values from a battery module exceed the limit, the MG Master will automatically take action to protect the connected battery modules.
 
Battery Management Controllers:
Protecting, monitoring and controlling a battery system is very important to create a safe, reliable and easy-to-use system. The MG Master LV or HV is the safety and control unit of the battery system. It protects the connected battery modules against over-charging, over-discharging, over-temperature, under-temperature and controls the balancing of the battery cells. Besides a safety funtion, the MG Master LV or HV monitors and tracks other important parameters to give insight in the battery status and energy consumption. MG's battery system CAN-bus protocol can be used to communicate with other equipment and multi functional display's (MFD's) by NMEA2000 and web interface. The MG Master LV and HV ensure an easy and proper installation. Thanks to the built-in safety components a reliable installation is guaranteed.
 
Energy Storage Systems:
System flexibility is one of the main key features of all MG products. Combining LFP series batteries together with one of the Master BMSs creates a powerful system for a complete range of applications. Redundant systems can be made by connecting multiple Master BMSs in parallel to increase system reliability and capacity.