MG Energy Systems LFP Series - Next Generation LiFePo4 chemistry
12.8V 210Ah  2688Wh 4S2P LiFePO4 Battery Module
Lead-acid replacement
Extended cycle life
Compact design
Plug and Play
Easy installation
High charge and discharge rate
NMEA2000 compatible
Specifications:
Cycle life: >3500 cycles (80% DoD) @ 25Deg Celcius to EoL of 70% of initial capacity.
Recommend discharge current: <105A
Continuous discharge current: 150A*
Max. discharge current: 168A*
End of discharge voltage: 12V
Charge voltage: 14.2V - 14.6V (14.2V recommended)
Recommended  charge current: <105A
Continuous charge current:  150A*
Max. charge current: 168A*
Recommended operating temperature: 20°C to +30ºC
Operating Discharge temperature: -20°C to +55ºC
Operating Charge temperature: 0°C to +45ºC
Storage temperature: 10°C to +35ºC
Humidity (non-condensing): max. 95%
Protection class: IP30
Cooling: Air, Convection
BMS passive balancing with integrated BMS.
NO Series Connection for this model ONLY.
Six (6) Parallel Connections Allowed.
Important Information:
This MG Energy 12.8V LFP Battery can be connected in Parallel configurations only. Series connections are not allowed for this model.
External BMS:
Systems using this battery require the use of a SmartLink Connect (MG2000112) Battery Management Controller.
Fuses:
200A fuse inside battery. Fuses can be replaced with dummy fuses for high power applications. The battery will require external fuses in these cases.
*See Product Manual or Datasheet for more information and full specifications.
Product Supplied With:
RJ45 CANBus comms connection.
 
Product Details
Selling Unit
EACH
Model No
MGLFPSC120210-RJ45
Inventory Code
 
Brand
MG Energy
Description
12.8V 210Ah 2688Wh Lithium Iron Phosphate (LiFePO4) Battery Module with RJ45 CANBus Connection & Metal Casing
Application
Automotive/Marine/RV Auxilliary Battery Banks, Off-Grid & Self Consumption Solar, UPS, Peak Shaving
Chemistry
Lithium Iron Phosphate (LiFePO4)
Voltage
12.8V
Watt Hour
2688.0Wh
Nominal Capacity
210Ah
Maximum Continuous Discharge Current
168A (0.8C)*
Termination
M8 Stud (Max. 20Nm)
Size
4S2P
Width
154mm
Height
286mm
Length / Breadth / Depth
395mm
Weight
23000g
*Duration is depending on battery & internal contactor temperature.
 
Applications:
The LFP series is designed for use in a large range of applications such as mobile, marine and off-grid. For example to power electric motors for hydraulic power packs or electric-hybrid propulsion systems.
 
Easy Installation:
Combining the LFP 12.8V battery with the MG SmartLink Connect creates a compact system with reduced wiring and external components. The LFP 12.8V has Internal Safety Contactor, Built-in BMS, Bi-Stable Contactor, Shunt, Pre-charger Circuit, Internal Fuse for an all integrated battery for Plug & Play solution.
 
Safety:
Each battery module comes with an integrated battery management system (BMS). This is an intelligent electronic module (SmartLink Connect), that measures all cell voltages and temperatures to control balancing on both battery cell and module level. The battery modules communicate with internal dedicated shunt and BMS, which collects and monitors the status of all battery modules. If the measured values from a battery module exceed the limit, the MG SmartLink Connect will automatically take action to protect the connected battery modules.
 
Battery Management Controllers:
Protecting, monitoring and controlling a battery system is very important to create a safe, reliable and easy-to-use system. The SmartLink Connect is the safety and control unit of the battery system. It protects the connected battery modules against over-charging, over-discharging, over-temperature, under-temperature and controls the balancing of the battery cells. Besides a safety funtion, the MG SmartLink Connect monitors and tracks other important parameters to give insight in the battery status and energy consumption. MG's battery system CAN-bus protocol can be used to communicate with other equipment and multi functional display's (MFD's) by NMEA2000 and web interface. The MG Master LV and HV ensure an easy and proper installation. Thanks to the built-in safety components a reliable installation is guaranteed.
 
Energy Storage Systems:
System flexibility is one of the main key features of all MG products. Combining LFP series batteries together with one of the Master BMSs creates a powerful system for a complete range of applications. Redundant systems can be made by connecting multiple Master BMSs in parallel to increase system reliability and capacity.